LOWER CONTROL ARM PIVOT

Use these lower control arm pivots to replace broken or worn originals.  Two different styles are made, one to be used with rubber bushings and one for poly bushings.  The pivot for rubber is used just like the original.  To use the lower control arm poly pivot, burn the rubber out of the control arm bushing and leave it's outer shell in place.  The poly is then placed in the sleeve and the lower control arm pivot is then pushed into place (inner sleeves are not used). Both poly or rubber control arm bushings are sold separately.

(Note:  Close this window to go back to your parts list or to go to our main page, click on www.espo.com